2013 Jeep wrangler unlimited Sahara
1C4HJWEG5DL558889
Vehicle history report for the 2013 Jeep wrangler unlimited Sahara (VIN 1C4HJWEG5DL558889). Black, sport utility vehicle [suv]/multipurpose vehicle [mpv], 3.6L 6-cyl 283 hp, gasoline. Title: Clean. 117,864 mi reported. Registered in In. No open recalls. Unlock full title, salvage, lien & accident hi
At a glance
Vehicle identity & specifications
What's a 2013 Jeep wrangler unlimited worth?
What comparable 2013 Jeep wrangler unlimited vehicles are listed for — a quick gut-check before you negotiate.
Is the seller's price fair? Get this exact VIN's current market value — retail, trade-in & loan value — in the full report.
See this car's exact value →Full vehicle history report
What a full report checks for VIN 1C4HJWEG5DL558889
A full report searches national title databases (NMVTIS) and licensed history providers for this VIN and shows whatever records are on file — not every vehicle has every record type. The decode, safety recalls and owner complaints above are always free.
Safety recalls None found
No open NHTSA recall campaigns were found for this 2013 jeep wrangler unlimited.
We'll email you the moment a new safety recall is issued — no spam, unsubscribe any time.
Common problems & what to inspect
Based on 646 owner complaints filed with NHTSA for the 2013 Jeep wrangler unlimited, here are the most-reported problem areas — and exactly what to check before you buy.
🔍 Brakes should feel firm and quiet — no grinding, pulsing or pulling. Check for an ABS light and uneven pad/rotor wear.
🔍 Test every electrical feature: windows, locks, infotainment, charging and all lights. Watch for flickering, dead accessories or warning lights.
🔍 Confirm the airbag light turns on then off at startup — if it stays lit there's a fault (costly, and a safety risk). Check for signs of prior deployment.
🔍 Steering should be tight and centered — no play, clunks or wandering. Test at low and highway speed; listen for power-steering whine.
🔍 Listen for knocks or ticking, check for leaks and blue/white exhaust smoke, and make sure it doesn't overheat. No check-engine light should be on.
Pre-purchase checklist
- Match the VIN on the dash, door jamb and title — they must be identical.
- Cold-start the engine; listen for knocks and check for blue or white exhaust smoke.
- Test-drive through all gears at low and highway speed — no slipping, shudder or pulling.
- Confirm every warning light clears at startup (none should stay on).
- Check fluids — oil, coolant, transmission — for level, color and leaks.
- Look underneath for rust, fresh undercoating or signs of collision repair.
- Always get an independent pre-purchase inspection from a trusted mechanic.
Owner complaints 646
Complaints filed with NHTSA by owners of the 2013 Jeep wrangler unlimited.
SERVICE BRAKES
Had this 2013 Jeep Wrangler since new and has ABS module internal failure code C2200. ABS, ANTI SKID, BRAKE lights are constantly lit on the dashboard. No ABS on this Jeep making it unsafe in an emergency braking situation which could cause a crash. Have tried for over a year and a half to have the ABS repaired or get a new ABS Module. As of today, June 29, …
NHTSA ODI #11747157SERVICE BRAKES
The ABS module failed in summer 2025. We took the Jeep to the mechanic who was unable to source a new part. The part has been on backorder now for over a year. We cannot get the Jeep inspected because of the break safety issue. The Jeep has no ABS if emergency breaking. Several warning lights are constantly on when operating the Jeep.
NHTSA ODI #11741237SERVICE BRAKES
2013 Jeep Wrangler. ABS module internal failure code C2200. 3 lights are constantly lit on the dashboard. No ABS on this Jeep, making it unsafe in the rain and snow. No way to have this part repaired anymore, nor does the dealership offer it. Shameful and shocking that MOPAR isn't dealing with this problem. Many, many Jeep owners are dealing with this proble…
NHTSA ODI #11738792SERVICE BRAKES
C2200 Abs control module internal failure. Anti lock brake, traction control stop working. Vehicle can go into limp mode and not be drivable. Apparently due to safety concerns replacment parts are not produced by the manufacturer. This causing the vehilce to not be driven safely.
NHTSA ODI #11738389AIR BAGS
I purchased a 2013 Jeep Wrangler Unlimited Sahara (VIN [XXX] ) from Soliman Motors Inc., [XXX] (phone [XXX] ) on April 11, 2026. The vehicle is subject to active NHTSA stop-drive recall #19V-018 for the Takata passenger airbag inflator, issued January 15, 2019. This recall was not disclosed to me at any point before, during, or after the purchase. I was nev…
NHTSA ODI #11736315SERVICE BRAKES
The ABS module has failed. The jeep was not involved in an accident, it is at my house not driveable because Jeep does not have the ABS module. The part has been on factory back order with no date of availability. No aftermarket company produces the past. I now have a jeep that is useless. Jeep should be held accountable for availability of the part.
NHTSA ODI #11735984STEERING,UNKNOWN OR OTHER
My 2013 RHD jeep wrangler is showing codes B1B02 and B1B06. I took it to jason lewis automotive in sparta tn yesterday. The airbag light is on and the horn does not work. These are the exact same failures identified in safety recall s40. The previous owner of my car got this done in 2021 but the remedy has failed and the safety risk is back. They confirmed t…
NHTSA ODI #11734495ELECTRICAL SYSTEM,SERVICE BRAKES
I have a 2013 Jeep Wrangler with 180,000 miles. I never off road the vehicle, but after driving on a dirt road, the stability control kicked in during a turn. At the start of the next drive after that, there were 3 lights on the dashboard: brake, ABS, stability control. Connecting the JScan app to the vehicle, the ABS module is completely unresponsive and…
NHTSA ODI #11732938+ 638 more complaints on record.




