2010 RAM 2500 DJ2, DJ7
3D7UT2CL1AG111461
Vehicle history report for the 2010 RAM 2500 (VIN 3D7UT2CL1AG111461). Custom. Title: Clean. 175,000 mi reported. Registered in Il. 4 open safety recalls. Unlock full title, salvage, lien & accident history.
At a glance
Vehicle identity & specifications
What's a 2010 RAM 2500 worth?
What comparable 2010 RAM 2500 vehicles are listed for — a quick gut-check before you negotiate.
Is the seller's price fair? Get this exact VIN's current market value — retail, trade-in & loan value — in the full report.
See this car's exact value →Full vehicle history report
What a full report checks for VIN 3D7UT2CL1AG111461
A full report searches national title databases (NMVTIS) and licensed history providers for this VIN and shows whatever records are on file — not every vehicle has every record type. The decode, safety recalls and owner complaints above are always free.
Safety recalls 4
POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the …
Remedy: Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
NHTSA Campaign #17V821000 · 20/12/2017STEERING:LINKAGES:TIE ROD ASSEMBLY
Chrysler Group LLC (Chrysler) is recalling certain model year 2008-2012 RAM 2500 4X4 and 3500 4X4 trucks, 2008-2012 Dodge RAM 3500 4x2 Cab Chassis, and model year 2008 Dodge RAM 1500 Mega Cab 4x4. The left tie rod assembly may break.
Remedy: Chrysler notified owners on January 16, 2014 that dealers would inspect vehicles and replace the steering linkage assembly, if necessary. On or about February 27, 2014, Chrysler ceased its recall remedy program due to parts quality concerns, and then re-initiated it on or about April 14, 2014. In
NHTSA Campaign #13V529000 · 06/11/2013STEERING:LINKAGES:TIE ROD ASSEMBLY
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008-2011 DODGE RAM 2500/3500 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; MODEL YEAR 2008-2011 DODGE RAM 3500 CAB CHASSIS 4X2, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; AND MODEL YEAR 2008 DODGE RAM 1500 MEGA CAB 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH AUGUST 15, 2008, BECAUSE THE LEFT TIE ROD BALL STUD MAY…
Remedy: DEALERS WILL INSPECT THE TIE ROD ENDS FOR RELATIVE ORIENTATION AND REPLACE THE LEFT OUTER TIE ROD AS REQUIRED AND PERFORM A FRONT END TOE ALIGNMENT AS NEEDED. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 3, 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
NHTSA Campaign #11V350000 · 06/07/2011ENGINE AND ENGINE COOLING:ENGINE:DIESEL
Chrysler Group LLC (Chrysler) is recalling certain model year 2010-2014 Ram 2500, 3500, 4500, and 5500 trucks manufactured March 27, 2009, to September 5, 2013. In the affected vehicles, the electrical connectors of the diesel fuel heater may overheat.
Remedy: Chrysler will notify owners, and dealers will replace the harness side connector with a silver plated beryllium copper terminal service kit, and inspect the fuel heater for leaks, replacing it as necessary, free of charge. Chrysler issued interim notification to owners on December 8, 2014. The rec
NHTSA Campaign #14V635000 · 08/10/2014We'll email you the moment a new safety recall is issued — no spam, unsubscribe any time.
Common problems & what to inspect
Based on 236 owner complaints filed with NHTSA for the 2010 RAM 2500, here are the most-reported problem areas — and exactly what to check before you buy.
🔥 1 involved a fire 🚑 2 reported injuries
🔍 Steering should be tight and centered — no play, clunks or wandering. Test at low and highway speed; listen for power-steering whine.
🔍 Test every electrical feature: windows, locks, infotainment, charging and all lights. Watch for flickering, dead accessories or warning lights.
🔍 Listen for knocks or ticking, check for leaks and blue/white exhaust smoke, and make sure it doesn't overheat. No check-engine light should be on.
🔍 Listen for clunks over bumps, check the car sits level, and look for uneven tire wear and worn shocks or struts.
🔍 Check for fuel or battery warnings, hard starts and stalling. On a hybrid/EV, confirm charging and range behave normally.
🔍 Inspect for rust, fresh undercoating, mismatched paint, uneven panel gaps and any sign of prior collision or frame repair.
Pre-purchase checklist
- Match the VIN on the dash, door jamb and title — they must be identical.
- Cold-start the engine; listen for knocks and check for blue or white exhaust smoke.
- Test-drive through all gears at low and highway speed — no slipping, shudder or pulling.
- Confirm every warning light clears at startup (none should stay on).
- Check fluids — oil, coolant, transmission — for level, color and leaks.
- Look underneath for rust, fresh undercoating or signs of collision repair.
- Always get an independent pre-purchase inspection from a trusted mechanic.
Owner complaints 236
Complaints filed with NHTSA by owners of the 2010 RAM 2500.
STRUCTURE
The contact owns a 2010 Dodge Ram 2500. The contact stated that while performing routine maintenance on the vehicle, the contact observed that the passenger’s and driver’s side support rails on the sub frame had several sections that were severely rusted. The contact stated that there were gaps of approximately 2-feet on both rails where the metal was rusted…
NHTSA ODI #11688824ELECTRICAL SYSTEM
The contact owns a 2010 Ram 2500. The contact stated while driving approximately 70 MPH, the vehicle was driven over uneven pavement, causing the ignition key to fall out of the ignition. The contact coasted to the side of the road and placed the key back in the ignition and continued driving; however, the failure reoccurred several more times. The contact f…
NHTSA ODI #11664513STEERING,SUSPENSION,WHEELS
This is the 3rd time this happened to me. The first time I was driving around 55 and the truck started to shake so bad I could not actually hold onto the steering wheel, and I made it to the side of the road. I thought was a flat tire and I pulled over to find nothing wrong. The second was bad as it shook so violently, I was unable to make it to the side o…
NHTSA ODI #11443944FUEL/PROPULSION SYSTEM
Fuel pump failed with no warning. Best One of Indy confirmed and replaced. It was parked and would not start.
NHTSA ODI #11437231ENGINE AND ENGINE COOLING
TL* THE CONTACT OWNS A 2010 RAM 2500. THE CONTACT STATED THAT THE EXHAUST SYSTEM REGENERATION REQUIRED NOW WARNING LIGHT WAS ILLUMINATED. THE VEHICLE WAS NOT TAKEN TO A LOCAL DEALER. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS INFORMED OF THE FAILURE AND INFORMED THE CONTACT THAT THE VIN WAS NOT UNDER RECALL. THE FAILURE MILEAGE WAS APPROXIMATELY 43,0…
NHTSA ODI #11415977ENGINE,FUEL/PROPULSION SYSTEM
I RECEIVED A VE5 LATE LIFE EMISSION PERFORMANCE DEGRADATION RECALL IN JANUARY 2021. I HAD THE RECALL PERFORMED ON 1.27/2021 AT RAZZARI DODGE, MERCED. THEY INSTALLED A NEW CAT CONVERTER AND EXHAUST MANIFOLD. WHEN I GOT MY TRUCK BACK, I HAD AN CEL ERROR CODE P2271 O2 SENSOR. I HAD TO PAY $707.74 AND $978.98 TO GET THE TRUCK RUNNING. I HAD NO PREVIOUS CEL.…
NHTSA ODI #11408550UNKNOWN OR OTHER
I TOOK IT TO THE DODGE DEALER FOR A RECALL NOTICE I RECEIVED, THE RECALL WAS FOR THE CATALYTIC CONVERTER AND THE EXHAUST MANIFOLD TO BE REPLACED. THE WORK WAS COMPLETED, I TOOK THE TRUCK HOME AND ASSUMED THINGS WERE FINE. IN JANUARY OF THIS YEAR I WENT UNDER THE TRUCK TO SEE ABOUT A OIL LEAK I WAS HAVING A PROBLEM WITH, I NOTICED THE CATALYTIC CONVERTER WAS …
NHTSA ODI #11397778ELECTRICAL SYSTEM,UNKNOWN OR OTHER,ENGINE
IT'S A RANDOM OCCURRENCE. WHILE I'M STARTING IT, I HAVE TO RESTOP WHEN I'M DRIVING NO WARNING, IT'S A MANUAL TRANSMISSION. THAT ADDS A HUGE DANGER WHEN YOUR TRUCK DIES IN MOTION IT'S A BIG TRUCK IT'S A WORK TRUCK WHICH MAKES IT EVEN MORE HORRIFYING.!! PLEASE TAKE THIS SERIOUSLY THIS IS A HUGE DANGER I CAN'T STRESS HOW IMPORTANT THIS IS AND I'M SURE ALL THE A…
NHTSA ODI #11385056+ 228 more complaints on record.
Recently searched vehicles
Frequently asked questions
Can I find out who owns this vehicle from the VIN?
No — and no legitimate service can. Linking a VIN or plate to a named owner is restricted by the U.S. Driver's Privacy Protection Act, the EU GDPR and equivalent laws. CarLogs shows the vehicle only — specs, recalls, problems and value — never the person.
Is the VIN 3D7UT2CL1AG111461 valid?
3D7UT2CL1AG111461 is a structurally valid 17-character VIN with a correct ISO 3779 check digit, assigned to a manufacturer in Mexico. It decodes to the 2010 RAM 2500.
Does the 2010 RAM 2500 have any open safety recalls?
Yes — 4 open NHTSA safety recalls are on record for the 2010 RAM 2500. Recall repairs are carried out free by any franchised dealer; see the recall details above.
What is a fair price for a 2010 RAM 2500?
Comparable 2010 RAM 2500 listings run roughly $19,890–$34,995, typically around $25,003 (from 10 comparable vehicles). The full report shows this exact VIN's valuation.
Data last checked 4 Sep 2026 · Sources: NHTSA (recalls & complaints), U.S. EPA (fuel economy), NHTSA vPIC (specifications). Vehicle data only — CarLogs never shows owner information.